PRODUCTS

PRODUCTS

The materials used are harmless to the environment

Stainless Steel Expanded metal mesh comes in two forms: raised expanded metal and flattened expanded metal.Raised expanded metal is also known as standard expanded metal, it has diamond openings with slightly raised surface.Flattened expanded metal is manufactured by passing the standard expanded sheet through a cold roll reducing mill, forming diamond openings with flat surface.

 

Specifications

Style

Minimum Thickness (inches)A

Nominal Weight in lbs./100

Sq. Ft.B

Design Size (inches)C

Opening Size (inches)C

Strand Size (inches)

OverallThickness (inches)

Open Area

SWD

LWD

SWO

LWO

Width

Thickness

¼"-#20

0.026

74

0.250

1.05

0.092

0.715

0.079

0.029

0.029

37%

¼"-#18

0.034

100

0.250

1.05

0.090

0.715

0.080

0.038

0.038

36%

½"-#20

0.026

37

0.500

1.26

0.342

1.000

0.079

0.029

0.029

68%

½"-#18

0.034

61

0.500

1.26

0.306

1.000

0.097

0.038

0.038

61%

½"-#16

0.043

77

0.500

1.26

0.304

1.000

0.098

0.048

0.048

61%

½"-#13

0.066

126

0.500

1.26

0.286

1.000

0.107

0.072

0.072

57%

¾"-#16

0.043

47

0.923

2.10

0.701

1.750

0.111

0.048

0.048

76%

¾"-#14

0.054

56

0.923

2.10

0.713

1.760

0.105

0.060

0.060

77%

¾"-#13

0.066

67

0.923

2.10

0.711

1.781

0.106

0.072

0.072

67%

¾"-#10

0.066

102

0.923

2.10

0.603

1.755

0.160

0.072

0.072

65%

¾"-#9

0.101

157

0.923

2.10

0.593

1.688

0.165

0.108

0.108

64%

1"-#16

0.043

38

1.000

2.52

0.804

2.250

0.098

0.048

0.048

80%

1½"-#16

0.043

35

1.330

3.15

1.092

2.750

0.119

0.048

0.048

82%

1½"-#14

0.054

43

1.330

3.15

1.098

2.750

0.116

0.060

0.060

83%

1½"-#13

0.066

51

1.330

3.15

1.098

2.750

0.116

0.072

0.072

83%

1½"-#9

0.101

105

1.330

3.15

1.014

2.563

0.158

0.108

0.108

76%

 

A The minimum thickness is absolute, not subject to minus variation.

B A variation in weight per square ft. of ±10 % is permissible, based on the weight of any sheet or bundle.

C A tolerance of ±10 % is permitted in dimensions, center to center.